Speak "Yes" To These 5 Nissan Qashqai Key Replacement Tips

· 4 min read
Speak "Yes" To These 5 Nissan Qashqai Key Replacement Tips

How to Replace a Nissan Juke Spare Key

Nissan Juke is a fun and stylish hatchback that features an unusual engine configuration. It's noisy, however it's still a fun car to drive.

Replace the battery in the key fob of your Nissan Juke every two years, or when the battery is depleted. You can do it yourself, however you will need some tools.

Dead Coin Battery

If your Nissan Juke key fob isn't functioning the first thing to be sure of is the battery inside. It could be dead and requires to be replaced, which is a straightforward fix that takes just about a couple of minutes. Flip the fob upside down and you'll be able to see the tiny latch/release located at the back. Replace the battery that was in use by making sure it's on the bottom of the fob. Line up the two halves with care.



If the fob has been exposed to water, it will need to be cleaned prior putting the new battery in. This can be accomplished by using a paper towel, isopropyl alcohol or electronic cleaner, and then allowing it to dry completely before re-inserting the battery.

To start the car, the key fob must be connected to the car. This can be accomplished using the instructions in the owner's guide or an OBDII scan. The most likely reason why the key fob was not working is because it wasn't paired. It is also possible that the fob has an issue with the chip, but this is a rare occurrence. A new receiver module might be required in this scenario. If this is the situation it must be replaced by a professional technician.

Water Damage

Key fobs are powered by batteries, and the batteries should be replaced every two years or so, or at the first sign of the car not responding when you hit the "start" button. The key's rubber seals keep water out, but submerging a key fob in the pool or ocean can damage the electronic chip. If this happens, you will need to obtain a new key from Nissan or an automotive locksmith.

If the key fob has functioning chips it's possible that the computer has lost connection to it, and this could occur for a variety of reasons. This can be fixed by restarting the car. If the "Key ID error" message is still visible it is necessary to contact Nissan for assistance.

The three most common reasons for this problem are dead battery on the key fob, a non-programmed key, and a damaged, or malfunctioning key fob. The first two problems can be fixed fairly easily while the third one is more difficult to identify and repair immediately but can be solved with patience. WhoCanFixMyCar lets you compare Nissan Key Replacement prices in your local area and then book your repair. It takes just a few minutes, and you can even read reviews of customers from local garages, Nissan car mechanics and dealerships before you decide.

Faulty Chip

The key fob on your Nissan Juke contains a special chip which sends a message to the vehicle each time you turn it. If that chip is faulty, it can cause the key to cease functioning. If this is the case the issue can only be solved by replacing the key. Your Nissan Juke key may be defective due to a variety of reasons, including water damage or a dead coin-battery.

Check the chip for any water damage in the event that your key fob stopped working after a bath or wash. Verify that the metal clips that hold the chip are securely. Also, ensure that the chip isn't exposed water. If you see any indications of water damage on the electronic component, unplug the battery and clean it with isopropyl-ethanol or electronic cleaner.

If the chip is damaged, you will need to visit your local locksmith or dealership. They will need the year model, make, and year of your vehicle in order to locate an alternative. Also, you will need to record your VIN (Vehicle ID Number) so that the dealer, or locksmith knows what key you have. This will enable them to check the correct key code and ensure that they cut the correct one.

Faulty Receiver Module

The key fob sends out a radio signal to your vehicle that performs various functions. It can unlock your trunk as you hurry to the car with your groceries or start your car by pressing the button on the fob. It can also open your windows and turn on the horn if you accidentally lock the keys in your car.

If the key fob ceases functioning, there could be an issue with the receiver unit in the vehicle. The receiver modules are tuned to ensure they can receive certain frequencies that correspond to signals generated by Nissan key fobs. If your car has a faulty receiver module, it will stop responding to any signal from the key fob.

It's best to have an extra Nissan key fob in the event that your original key gets lost or breaks. A spare key can be programmed by a locksmith or dealership to work with your Nissan and save you the stress of locking your keys inside your vehicle or losing them.

If  The Keylab  was exposed to rain or clean tap water, you can fix the issue by cleaning it using isopropyl or an electronic cleaner. If, however, the chip has deteriorated, you will have purchase a new key fob which can be assigned to your vehicle by a locksmith or dealer.